There are a number of ways to wire your design.
Component to component
Tap a component's wiring point (black diamond) and tap another component's wiring point.
The connection is automatically made, and the new wire is selected.
Zoom in and pan as required while wiring.
Connecting components pin-to-pin
Drag a component until the desired pin touches a pin on another component and release.
If you move one of the components, the pins remain wired together.
This will also work if you drag a component's pin onto an existing wire or junction.
When wiring from a component pin or a junction, tap on the workspace to anchor the wire at that location.
Starting a wire with a junction
Tap the Junction button in the Schematic connectors subpalette to place a junction. The cursor changes to reflect the selection .
Tap to place the junction in the desired location to start wiring. You can place the junction directly on the workspace, on a wire, on another junction or on a component pin.
Keyboard users can also type J to attach a junction to the cursor.
Complete the wire as desired.
Terminating a wire
You can terminate a wire by tapping on:
You can also terminate a wire with a:
Moving a placed wire
Tap the wire to select it and drag it horizontally or vertically.
These appear during wiring: